dmesg - Western Digital WD10EAVS-32D
microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-72-generic (buildd@lcy01-17) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #93-Ubuntu SMP Fri Mar 31 14:07:41 UTC 2017 (Ubuntu 4.4.0-72.93-generic 4.4.49)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000df77ffff] usable
BIOS-e820: [mem 0x00000000df780000-0x00000000df7a2fff] ACPI NVS
BIOS-e820: [mem 0x00000000df7a3000-0x00000000df7dffff] ACPI data
BIOS-e820: [mem 0x00000000df7e0000-0x00000000df7fffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. Z68A-D3-B3/Z68A-D3-B3, BIOS F11 03/21/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 100000000 mask F00000000 write-back
3 base 200000000 mask FE0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 512MB, type WB
total RAM covered: 8192M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5b30-0x000f5b3f] mapped at [ffff8800000f5b30]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x0220b000, 0x0220bfff] PGTABLE
BRK [0x0220c000, 0x0220cfff] PGTABLE
BRK [0x0220d000, 0x0220dfff] PGTABLE
BRK [0x0220e000, 0x0220efff] PGTABLE
BRK [0x0220f000, 0x0220ffff] PGTABLE
BRK [0x02210000, 0x02210fff] PGTABLE
RAMDISK: [mem 0x336e4000-0x35b69fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7720 000014 (v00 GBT )
ACPI: RSDT 0x00000000DF7A3040 000054 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000DF7A3100 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000DF7A31C0 004F9F (v01 GBT GBTUACPI 00001000 MSFT 04000000)
ACPI: FACS 0x00000000DF780000 000040
ACPI: MSDM 0x00000000DF7A82C0 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 0x00000000DF7A8380 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000DF7A8400 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: ASPT 0x00000000DF7A8500 000034 (v07 GBT PerfTune 312E3042 UTBG 01010101)
ACPI: SSPT 0x00000000DF7A8540 002340 (v01 GBT SsptHead 312E3042 UTBG 01010101)
ACPI: EUDS 0x00000000DF7AA880 0000C0 (v01 GBT 00000000 00000000)
ACPI: MATS 0x00000000DF7AA940 000034 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000DF7AA9A0 0008FA (v01 GBT GBT B0 5455312E BG?? 45240101)
ACPI: APIC 0x00000000DF7A81C0 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000DF7AB2C0 001DC0 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: MATS 0x00000000DF7AD080 00A5AC (v01 MATS RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f7fffff]
NODE_DATA(0) allocated [mem 0x21f7f5000-0x21f7f9fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021f7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000df77ffff]
node 0: [mem 0x0000000100000000-0x000000021f7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021f7fffff]
On node 0 totalpages: 2092830
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14238 pages used for memmap
DMA32 zone: 911232 pages, LIFO batch:31
Normal zone: 18400 pages used for memmap
Normal zone: 1177600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdf780000-0xdf7a2fff]
PM: Registered nosave memory: [mem 0xdf7a3000-0xdf7dffff]
PM: Registered nosave memory: [mem 0xdf7e0000-0xdf7fffff]
PM: Registered nosave memory: [mem 0xdf800000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xdf800000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88021f400000 s98264 r8192 d28712 u262144
pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2060107
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8116864K/8371320K available (8452K kernel code, 1293K rwdata, 3976K rodata, 1484K init, 1316K bss, 254456K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3092.957 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.91 BogoMIPS (lpj=12371828)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
ftrace: allocating 32111 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 4
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x29, date = 2013-06-12
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24743.65 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdf780000-0xdf7a2fff] (143360 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 13:27:24, date: 04/18/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:1f.2: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:1f.2: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:1f.2: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:1f.2: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:1f.2: reg 0x24: [io 0xfa00-0xfa0f]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf800-0xf807]
pci 0000:00:1f.5: reg 0x14: [io 0xf700-0xf703]
pci 0000:00:1f.5: reg 0x18: [io 0xf600-0xf607]
pci 0000:00:1f.5: reg 0x1c: [io 0xf500-0xf503]
pci 0000:00:1f.5: reg 0x20: [io 0xf400-0xf40f]
pci 0000:00:1f.5: reg 0x24: [io 0xf300-0xf30f]
pci 0000:01:00.0: [1002:6810] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfbc80000-0xfbcbffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xde00-0xdeff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfbbff000-0xfbbfffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfbef8000-0xfbefffff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xee00-0xeeff]
pci 0000:04:00.0: reg 0x18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci 0000:05:00.0: [1283:8892] type 01 class 0x060400
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 05-06]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdf780000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x0805] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0400-0x04cf] could not be reserved
system 00:02: [io 0x04d2-0x04ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x1000-0x107f] has been reserved
system 00:03: [io 0x1080-0x10ff] has been reserved
system 00:03: [io 0x1100-0x117f] has been reserved
system 00:03: [io 0x1180-0x11ff] has been reserved
system 00:03: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
system 00:04: [io 0x0454-0x0457] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:06: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:06: [mem 0xdf780000-0xdf7dffff] could not be reserved
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x00100000-0xdf77ffff] could not be reserved
system 00:06: [mem 0xdf7e0000-0xdf7fffff] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:06: [mem 0xfed20000-0xfed8ffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
system 00:06: [mem 0x000e0000-0x000effff] has been reserved
system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
system 00:06: [mem 0x40000000-0x400fffff] could not be reserved
system 00:06: [mem 0xdf800000-0xdfffffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:00:1c.3: PCI bridge to [bus 05-06]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:07: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:07: resource 9 [mem 0xe0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 4 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 37400K (ffff8800336e4000 - ffff880035b6a000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdb780000-0xdf780000] (64MB) mapped at [ffff8800db780000-ffff8800df77ffff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1492522044.648:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 19
ata2: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
ata4: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-72-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-72-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-72-generic xhci-hcd
usb usb3: SerialNumber: 0000:02:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-72-generic xhci-hcd
usb usb4: SerialNumber: 0000:02:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.0-72-generic xhci-hcd
usb usb5: SerialNumber: 0000:03:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.4.0-72-generic xhci-hcd
usb usb6: SerialNumber: 0000:03:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: New USB device found, idVendor=174c, idProduct=1153
usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-1: Product: AS2115
usb 4-1: Manufacturer: ASMedia
usb 4-1: SerialNumber: 00000000000000000000
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 04ae903e4643330d1fe41947e79c28b436494994'
zswap: loaded using pool lzo/zbud
Key type trusted registered
usb 1-1: new high-speed USB device number 2 using ehci-pci
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 13:643:483
rtc_cmos 00:01: setting system clock to 2017-04-18 13:27:25 UTC (1492522045)
ata3: SATA link down (SStatus 0 SControl 300)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata4: SATA link down (SStatus 0 SControl 300)
usb 5-1: new low-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-1: New USB device found, idVendor=2109, idProduct=3431
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 5-1: New USB device found, idVendor=046d, idProduct=c215
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Logitech Extreme 3D
usb 5-1: Manufacturer: Logitech
usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd
usb 5-2: new low-speed USB device number 3 using xhci_hcd
usb 4-2: New USB device found, idVendor=174c, idProduct=1153
usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-2: Product: AS2115
usb 4-2: Manufacturer: ASMedia
usb 4-2: SerialNumber: 00000000000000000000
usb 1-1.5: new low-speed USB device number 3 using ehci-pci
usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd
usb 4-3: New USB device found, idVendor=0bc2, idProduct=3322
usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-3: Product: Expansion Desk
usb 4-3: Manufacturer: Seagate
usb 4-3: SerialNumber: NA8F48BE
usb 5-2: New USB device found, idVendor=093a, idProduct=2521
usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-2: Product: USB OPTICAL MOUSE
usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-9: C300-MTFDDAC064MAG, 0006, max UDMA/100
ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
ata1.00: ATA-8: WDC WD10EAVS-32D7B1, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATAPI: ATAPI DVD A DH24ABS, AP56, max UDMA/100
ata1.00: configured for UDMA/133
usb 1-1.5: New USB device found, idVendor=258a, idProduct=0001
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: USB KEYBOARD
usb 1-1.5: Manufacturer: SINO WEALTH
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD10EAVS-32D 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 0:0:1:0: CD-ROM ATAPI DVD A DH24ABS AP56 PQ: 0 ANSI: 5
sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg1 type 5
scsi 1:0:0:0: Direct-Access ATA C300-MTFDDAC064M 0006 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 4-4: new SuperSpeed USB device number 5 using xhci_hcd
usb 4-4: New USB device found, idVendor=0bc2, idProduct=3322
usb 4-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-4: Product: Expansion Desk
usb 4-4: Manufacturer: Seagate
usb 4-4: SerialNumber: NA8F48BC
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1776K (ffff880001844000 - ffff880001a00000)
Freeing unused kernel memory: 120K (ffff880001de2000 - ffff880001e00000)
usb 1-1.6: new full-speed USB device number 4 using ehci-pci
random: systemd-udevd: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
usb-storage 4-1:1.0: USB Mass Storage device detected
scsi host4: usb-storage 4-1:1.0
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi host5: usb-storage 4-2:1.0
usbcore: registered new interface driver usb-storage
[drm] Initialized drm 1.1.0 20060810
scsi host6: uas
scsi 6:0:0:0: Direct-Access Seagate Expansion Desk 9401 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] 5860533167 512-byte logical blocks: (3.00 TB/2.73 TiB)
hidraw: raw HID events driver (C) Jiri Kosina
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 4f 00 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi host7: uas
usbcore: registered new interface driver uas
scsi 7:0:0:0: Direct-Access Seagate Expansion Desk 9401 PQ: 0 ANSI: 6
sd 7:0:0:0: Attached scsi generic sg4 type 0
sd 7:0:0:0: [sdd] 5860533167 512-byte logical blocks: (3.00 TB/2.73 TiB)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000e62000, 50:e5:49:3a:f1:85, XID 0c900800 IRQ 27
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 4f 00 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
tsc: Refined TSC clocksource calibration: 3092.972 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1.6: New USB device found, idVendor=046d, idProduct=08ad
usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6810 0x148C:0x2340).
[drm] register mmio base: 0xFBC80000
[drm] register mmio size: 262144
radeon 0000:01:00.0: Invalid ROM contents
ATOM BIOS: C63101
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 4078838 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading pitcairn Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:101 = 2212d02/0
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:101 = 2212d02/0
[drm] PCIE gen 2 link speeds already enabled
r8169 0000:04:00.0 enp4s0: renamed from eth0
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/usb5/5-2/5-2:1.0/0003:093A:2521.0002/input/input3
hid-generic 0003:093A:2521.0002: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:03:00.0-2/input0
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:258A:0001.0003/input/input4
input: Logitech Logitech Extreme 3D as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/usb5/5-1/5-1:1.0/0003:046D:C215.0001/input/input5
[drm] PCIE GART of 2048M enabled (table at 0x00000000002E8000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880210eaec00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880210eaec04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880210eaec08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880210eaec0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880210eaec10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001835a18
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff880210eaec18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff880210eaec1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
sdd: sdd1
sd 7:0:0:0: [sdd] Attached SCSI disk
hid-generic 0003:258A:0001.0003: input,hidraw1: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:1a.0-1.5/input0
logitech 0003:046D:C215.0001: input,hidraw2: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D] on usb-0000:03:00.0-1/input0
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:258A:0001.0004/input/input6
hid-generic 0003:258A:0001.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [SINO WEALTH USB KEYBOARD] on usb-0000:00:1a.0-1.5/input1
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
random: nonblocking pool is initialized
[drm] ring test on 6 succeeded in 28 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
scsi 5:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
scsi 4:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: Attached scsi generic sg6 type 0
sd 4:0:0:0: [sde] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 5:0:0:0: [sdf] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] Attached SCSI disk
sd 5:0:0:0: [sdf] Attached SCSI disk
clocksource: Switched to clocksource tsc
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD5
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 4:
[drm] DVI-D-1
[drm] HPD2
[drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[drm] Encoders:
[drm] DFP5: INTERNAL_UNIPHY1
[drm] fb mappable at 0xE06EA000
[drm] vram apper at 0xE0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
floppy0: no floppy controllers found
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: sse2x1 gen() 8249 MB/s
raid6: sse2x1 xor() 6413 MB/s
raid6: sse2x2 gen() 10327 MB/s
raid6: sse2x2 xor() 7413 MB/s
raid6: sse2x4 gen() 11877 MB/s
raid6: sse2x4 xor() 8863 MB/s
raid6: using algorithm sse2x4 gen() 11877 MB/s
raid6: .... xor() 8863 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 22176.000 MB/sec
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Set console keymap...
systemd[1]: Mounting Debug File System...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
lp: driver loaded but no devices found
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ppdev: user-space parallel port driver
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Set console keymap.
systemd[1]: Started Journal Service.
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
systemd-journald[306]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
media: Linux media interface: v0.10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
Linux video capture interface: v2.00
gspca_main: v2.14.0 registered
gspca_main: gspca_zc3xx-2.14.0 probing 046d:08ad
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
gpio_ich: GPIO from 436 to 511 on gpio_ich
input: gspca_zc3xx as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/input/input17
usbcore: registered new interface driver gspca_zc3xx
usbcore: registered new interface driver snd-usb-audio
Adding 16393212k swap on /dev/sda4. Priority:-1 extents:1 across:16393212k FS
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1492522052.982:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1002 comm="apparmor_parser"
audit: type=1400 audit(1492522052.982:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1002 comm="apparmor_parser"
audit: type=1400 audit(1492522052.982:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1002 comm="apparmor_parser"
audit: type=1400 audit(1492522052.982:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1002 comm="apparmor_parser"
audit: type=1400 audit(1492522052.982:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1001 comm="apparmor_parser"
audit: type=1400 audit(1492522052.982:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1001 comm="apparmor_parser"
audit: type=1400 audit(1492522052.982:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1007 comm="apparmor_parser"
audit: type=1400 audit(1492522052.982:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1007 comm="apparmor_parser"
audit: type=1400 audit(1492522052.986:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1008 comm="apparmor_parser"
audit: type=1400 audit(1492522052.986:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1010 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
floppy0: no floppy controllers found
r8169 0000:04:00.0 enp4s0: link down
r8169 0000:04:00.0 enp4s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
r8169 0000:04:00.0 enp4s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3092965833 Hz
vboxdrv: Successfully loaded version 5.0.32_Ubuntu (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
r8169 0000:04:00.0 enp4s0: link down
r8169 0000:04:00.0 enp4s0: link up
nbd: registered device at major 43
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
nbd: unregistered device at major 43
nbd: registered device at major 43
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
nbd: registered device at major 43
usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
nbd: registered device at major 43
usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
nbd: registered device at major 43
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
nbd: registered device at major 43
usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
diskSystemTest (19347): drop_caches: 3
diskSystemTest (19347): drop_caches: 3
diskSystemTest (19347): drop_caches: 3
diskSystemTest (19347): drop_caches: 3
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
diskSystemTest (22106): drop_caches: 3
diskSystemTest (22106): drop_caches: 3
diskSystemTest (22106): drop_caches: 3
diskSystemTest (22106): drop_caches: 3
nbd: registered device at major 43
diskSystemTest (23554): drop_caches: 3
diskSystemTest (23554): drop_caches: 3
diskSystemTest (23554): drop_caches: 3
diskSystemTest (23554): drop_caches: 3
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
nbd: registered device at major 43
diskSystemTest (26344): drop_caches: 3
diskSystemTest (26344): drop_caches: 3
diskSystemTest (26344): drop_caches: 3
diskSystemTest (26344): drop_caches: 3
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
nbd: registered device at major 43
diskSystemTest (29112): drop_caches: 3
diskSystemTest (29112): drop_caches: 3
diskSystemTest (29112): drop_caches: 3
diskSystemTest (29112): drop_caches: 3
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
nbd: registered device at major 43
diskSystemTest (31897): drop_caches: 3
diskSystemTest (31897): drop_caches: 3
diskSystemTest (31897): drop_caches: 3
diskSystemTest (31897): drop_caches: 3
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
nbd: registered device at major 43
usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
diskSystemTest (2279): drop_caches: 3
diskSystemTest (2279): drop_caches: 3
diskSystemTest (2279): drop_caches: 3
diskSystemTest (2279): drop_caches: 3
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
nbd: registered device at major 43
diskSystemTest (5318): drop_caches: 3
diskSystemTest (5318): drop_caches: 3
diskSystemTest (5318): drop_caches: 3
diskSystemTest (5318): drop_caches: 3
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
usb 4-2: reset SuperSpeed USB device number 3 using xhci_hcd
usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
diskSystemTest (8000): drop_caches: 3
diskSystemTest (8000): drop_caches: 3
diskSystemTest (8000): drop_caches: 3
diskSystemTest (8000): drop_caches: 3
nbd: registered device at major 43
diskSystemTest (9465): drop_caches: 3
diskSystemTest (9465): drop_caches: 3
diskSystemTest (9465): drop_caches: 3
diskSystemTest (9465): drop_caches: 3
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
do_trap: 36 callbacks suppressed
traps: chrome[9369] trap invalid opcode ip:55a041bd3d0b sp:7ffc7bee4680 error:0 in chrome[55a04107e000+6aa5000]
traps: chrome[9352] trap invalid opcode ip:5612273fc940 sp:7fff632a8860 error:0 in chrome[56122594c000+6aa5000]
nbd: registered device at major 43
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
sdc: sdc1
sdd: sdd1
nbd: registered device at major 43
block nbd0: Receive control failed (result -32)
block nbd0: shutting down socket
nbd: unregistered device at major 43
nbd: registered device at major 43
EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null)